To open and remove the crown in a quick and easy way. Insert the serrated tips in the line (previously made with a bur) and operate the lever.
Automatic Crown Remover is attached through the tip to the crown needing to be removed.It is a spring loaded mechanical device to remove the bonded crowns and bridges by an intensive impulse of the impact stress caused by the stored energy in the spring located inside the instrument. cement layer breaks with the impulse and the crown can removed easily.
Automatic Crown Remover is attached through the tip to the crown needing to be removed.It is a spring loaded mechanical device to remove the bonded crowns and bridges by an intensive impulse of the impact stress caused by the stored energy in the spring located inside the instrument. cement layer breaks with the impulse and the crown can removed easily.
This Crown Remover Tip (CR1) is attached to the crown remover guns to remove the single crown.
This Bifid Crown Remover Tip (CR2) is attached to the crown remover guns to remove the crowns.
This Sickle Crown Remover Tip (CR3) is attached to the crown remover guns to remove the crowns and bridges.
This Contra Angle Crown Remover Tip (CR4) is attached to the crown remover guns to remove the single crown.
This Inverted Curved Crown Remover Tip (CR5) is attached to the crown remover guns to remove the single crown.
This Straight Crown Remover Tip (CR6) is attached to the crown remover guns to remove the single crown.
This Flexi-Wire set (CR7) is attached to the crown remover{standard} guns to remove the bridge.
This Wire set with lock (CR8) is attached to the crown remover {Premium} guns to remove the bridge.
MANUAL Crown Remover has a slide “hammer” that attached to the crown needing to be removed, transmits an impact force to the crown without striking the object itself. Tips can be mounted on both sides of the crown remover
This Elbow hook tip of manual pattern crown remover is used to reach difficult areas while removing crown.
This Straight tip of manual pattern crown remover (CRMP2) is used to remove crown.
This Serrated tip of manual pattern crown remover (CRMP3) is used to remove crown.
Universal plier with positioning screw and internal spring for the removal of ceramic crowns and bridges. For a better grip, tip of pliers can be enhanced with rubber packing and emery powder.
• AUTOMATIC Crown Remover: attached through the tip to the crown needing to be removed
• AUTOMATIC Crown Remover: attached through the tip to the crown needing to be removed
